Drone flyaways are a nightmare for every drone operator since they can lead to the loss of costly equipment and even endanger personal safety. It is essential to follow these instructions before and during the flight in order to avert such a heartbreaking incident.
Before Flight
1. Selecting the Flight Environment: Flying in a spacious obstacle-free area is important for maintaining a steady connection between the drone and the controller.
2.Pre-Flight checks: To avoid an unusual flight or loss of control, we need to verify that the battery is fully charged and check the fuselage and blades for any possible damage.
3.Compass and Gyroscope Calibration: Compass calibration aids in identifying the drone's direction, while Gyroscope calibration maintain the drone’s balance. Both calibrations are crucial to ensure a steady and controlled flight.
During Flight
1. Signal Interference: Keep your drone higher than the nearby structures to avoid any possible signal interference, especially while flying long distances. Crash and signal interference risk increases when flying too low.
2. Compass Interference: Monitor the compass interference value and make sure it stays below 120. Steer clear of magnetic fields, signal towers, high-voltage lines, or parking lots when flying a drone because these can interfere with the drone's navigation system.
3. Battery Monitoring: Keep an eye on the battery status during the flight, especially in windy or low-temperature conditions, it is necessary to reserve enough battery power to allow the drone to return safely to its take-off point.
Summary
By following these guidelines during the before-flight and during-flight phases, we can significantly reduce the risk of drone flyaways. Safety and well preparation are key to enjoying a smooth drone flying experience.
Stay updated with Ruko for more drone-related information.
